Synergistic effect of bulk phase doping and layered-spinel structure formation on improving electrochemical performance of Li-Rich cathode material

In this study, La was doped into the lithium layer of Li-rich cathode material and formed a layered-spinel hetero-structure. The morphology, crystal structure, element valence and kinetics of lithium ion migration were studied by field emission scanning electron microscope (FESEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS). The La doped lithium-rich cathode material exhibited similar initial discharge capacity of 262.8 mAh g^?1 at 0.1 C compared with the undoped material, but the discharge capacity retention rate can be obviously improved to 90% after 50 cycles at 1.0 C. Besides that, much better rate capability and Li⁺ diffusion coefficient were observed. The results revealed that La doping not only stabilized the material structure and reduced the Li/Ni mixing degree, but also induced the generation of spinel phase to provide three-dimensional diffusion channels for lithium ion migration. Moreover, the porous structure of the doped samples also contributed to the remarkable excellent electrochemical performance. All of these factors combined to significantly improve the electrochemical performance of the material.     

基建勘探在超深井矿山建设中的应用：以思山岭铁矿为例#br#

思山岭铁矿上下采区首采开拓中段标高分别为-1 020 m和-1 200 m，地质勘查程度为详查，资源储量级别为控制的（122b）和推断的（333）。经基建巷道工程揭露，矿体赋存形态并非地质勘查时认为的“似金元宝形”向斜，而是单斜构造控制的矿体形态。详细分析了基建勘探工作在该矿建设中的作用，认为基建勘探采用探采结合、坑钻组合手段，注重综合研究概化地质模型，对矿井基建开拓设计和施工具有较好的指导作用。     

Microwave drying performance of lignite with the assistance of biomass-derived char

Microwave lignite drying with assistance of biomass-derived char was addressed and effect of bio-char on drying rate and energy consumption was investigated in this work. Effective diffusion coefficient and activation energy for the drying process were also analyzed. The results indicated the drying process was largely dependent on the variation of sample temperature. Bio-char originated from pine wood was most favorable for lignite drying, considering its better promoting effect and advanced security. There existed an optimal bio-char addition ratio for drying process at different power. The corresponding optimal ratio was 10% at 231?W and 15% at 385?W, at which the biggest drying rate and the least energy consumption were reached. It was compared lignite drying initiated at 385?W was better for energy conservation. Effective diffusivity was improved and activation energy was simultaneously reduced, with the addition of bio-char. The minimum activation energy was 15.54?W?·?g^?1, which was gained at bio-char addition ratio of 10%. The results revealed the effect of bio-char on depressing activation energy could rival that of metal-based additives. The drying process with assistance of microwave and bio-char could present technical and economical benefits on lignite upgrading.     

Study on wax precipitation characteristics of wax deposit in pipes

Wax deposit properties are a significant concern in pipeline pigging during waxy crude oil transportation. In the present work, the impacts of flow conditions and oil properties on the wax precipitation characteristics of wax deposits are investigated. A flow loop apparatus was developed to conduct wax deposition experiments using four crude oils collected from different field pipes. The differential scanning calorimetry (DSC) technique was employed to observe the wax precipitation characteristics of crude oil and wax deposit. The results show that the wax content and the wax appearance temperature (WAT) of the deposits increase with shear stress and radial temperature gradient, and decrease with radial wax molecule concentration gradient near the pipe wall. The DSC tests on the wax deposits revealed that the deposit wax content is strongly correlated to the oil wax content. Furthermore, an empirical correlation was developed to predict the wax content and the WAT of the wax deposit. Verification of the empirical correlation using the different oils indicated that the average relative error of the wax content prediction and average absolute error of WAT prediction were 13.2% and 3.6°C, respectively.     

三维最短路径法射线追踪及改进

射线追踪技术在地震学领域有着广泛的应用，其中以最短路径算法在复杂介质中走时计算稳定性最好。理论上最短路径法的误差来源为速度模型采样误差、空间离散化误差和角度离散化的误差，由此造成网格稀疏时射线路径呈之字形，计算走时比实际走时偏大。弯曲法追踪精度高，但是射线追踪速度受初始路径与真实射线路径逼近程度制约，在复杂介质中可能找不到全局最小走时路径。最短路径法追踪出来的网格射线路径，可以作为较理想的初始路径，供弯曲法迭代优化。将最短路径法和弯曲法结合，通过射线在初始路径附近的扰动得到Fermat原理约束下的最短路径。文章对常速模型的试算，显示了改进方法对射线路径优化的作用，在模型网格稀疏的情况下效果尤其明显。本算法适用于计算三维任意复杂介质中初至波走时和射线路径，可应用于三维走时层析成像等领域。     

天然气合成油技术发展动向

介绍了天然气合成油技术，天然气石油特征及代表性工艺过程，叙述了天然气合成油发展前景。     

多尺度对称变换及其应用于定位人脸特征点

提出了一种在图像的反对称双正交小波分解数据域中,实现多尺度对称变换的方法,并将它应用于脸部图像中主要特征点的定位.这种方法与直接在原始图像数据域中的同类方法相比,能大幅度减少计算量、加快定位速度,并明显提高定位准确度.除此之外,由于它是在小波分解数据域上实现的,这就为在图像数据压缩域中提取人脸图像特征奠定了基础.     

新型海洋涂料技术

本文综述了符合时代要求的海洋涂料新技术及其发展趋势。     

液压集成块校核软件的编制和应用

本文叙述了液压集成块校核软件的编制思想和方法，并重点介绍了编制过程中所使用的相关技术，同时给出部分源程序。